Click to view article in PDF format.
Ultra-High
Resolution
3-D Characterization of Deep-Water Deposits- II:
Insights into the
Evolution of a Submarine Fan and Comparisons with River Deltas*
By
R.T. Beaubouef, J.C. Van Wagoner, and N.L. Adair
Search and Discovery Article #40085 (2003)
ExxonMobil Exploration Company, 233 Benmar, Houston, TX, 77060, 281-654-5018 ([email protected])
*Adapted from "extended abstract" of poster session presentation at AAPG Annual Meeting, May 14, 2003, Salt Lake City, Utah.
NOTE: This is the fifth of six presentations on the general subject of the shapes of siliciclastic sedimentary bodies presented by this group of ExxonMobil researchers under the leadership of John C. Van Wagoner. Click to view a list of all these articles.
An ultra-high
resolution
3-D seismic survey was collected providing near outcrop scale
resolution
of the sedimentary bodies comprising a Pleistocene submarine fan in
the western Gulf of Mexico.
The survey area selected is an intra-slope basin located within the Texas continental
slope in approximately 1500-m water depth. The basin represents the terminal
portion (Basin 4) of a well-known chain of four Pleistocene intra-slope basins
often referred to as the Brazos-Trinity Intra-Slope System. At the top of the
basin fill is a large submarine fan (8km wide, 16-km long, 100-m maximum
thickness) referred to as the Upper Fan (Beaubouef et al., 2003). The
seismic program, designed to optimize
resolution
within the Upper Fan, has
provided data from which unprecedented images of the 3D architecture of a
submarine fan have been derived. We believe this program represents an
opportunity to enter a ''new frontier'' in the research of siliciclastic
reservoirs and is unique within industry and academia. The results are providing
detailed information regarding deep-water deposition far surpassing what is
possible from outcrop or conventional seismic, well log, and core studies.
|
The Upper Fan is
an 8-km wide, 16-km long, 100-m thick (maximum), SW tapering wedge of sediment
capped by a Holocene drape deposited after the fan was abandoned (Figure 1). The
fan exhibits a range of seismic facies, a ''shingled'' internal reflection
character, and contains both lobate and channel-form depositional elements.
These styles of deposits have previously been referred to as Distributary
Channel-Lobe Complexes or DLCs (Beaubouef and Friedmann; 2000) and are very
sand-rich. The Upper Fan in Basin 4 consists of numerous DLCs arranged in an
off-lapping arrangement. DLCs are considered analogous to parasequences in a
deep-water setting. Sediment was supplied to the fan from a fixed inlet channel
to the northeast. The inlet channel is leveed, but the eastern levee has been
removed by erosion and/or slumping. Slumping and large-scale water escape
features have modified the eastern margin of the fan related to failure of the
over-steepened, eastern basin margin. However, these syn- and post-depositional
modifications are relatively minor features that do not significantly impact
The fan achieves
its maximum thickness at a distance of 3-km down-stream of the inlet channel and
thins rapidly to the SW from this point. Strong down- and across-fan seismic
facies variations accompany these thickness changes and indicate significant
lithologic changes within the fan (Figures 2 and
3). Interval amplitude and
reflection continuity are correlated inversely with fan thickness. In proximal
areas where the fan is thick, the seismic facies are low amplitude and
discontinuous (Figure 2A). In distal reaches, the fan is much thinner and
characterized by high amplitude and continuous seismic facies (Figure 2C). In
proximal and medial regions, across-fan trends show progressive increases in
amplitude and continuity from a fan axis position to its margins. The amplitude
variability observed is the expression of impedance trends within the fan. The
three-dimensional impedance structure of the fan is, in turn, dependent upon the
As discussed above, the prominent stratigraphic features of the Upper Fan are: 1) the ''shingled'' or off-lapping internal reflection patterns, 2) the down-fan progression in architecture from channel-form elements to more sheet-like elements, 3) the down-fan decrease in sand percent and/or grain size inferred from seismic attributes. In these, and other ways, the stratigraphy of the upper fan is similar to that commonly cited for river deltas. Figure 5 illustrates aspects of these similarities through comparison with a stratigraphic model derived for parasequences of the Cretaceous Panther Tongue deltas (Utah). The seismic traverse through the Upper Fan illustrates the characteristics of the channel-lobe transition and the off-lapping arrangement of the constituent units (DLCs). The longitudinal traverse is comparable to profile DDn in the Panther Tongue model. In both cases, erosional surfaces of the proximal channelized regions shallow and broaden down-stream and pass into relatively conformable bedding surfaces within the inclined forsets of the more distal regions. In the transverse (strike) orientation, the channelized stratigraphy of the inner and outer stream mouth bar settings of the Panther Tongue (AAn, BBn) is analogous to that of the proximal and medial fan settings in Figure 2A and 2B. Likewise, the continuous, sheet-like stratigraphy of the delta front (Figure 4, CCn) is analogous to that of the distal fan setting (Figure 2C). These stratigraphic patterns record, among other things, the out-building or progradation of the depositional systems through time. Associated with episodes of progradation, a stratigraphic evolution within the Upper Fan is observed in which the fan becomes increasingly channelized and avulsion occurs more frequently through time. This evolution compares favorably that that shown for experimental deltas in Van Wagoner et al. (this volume). Early in the depositional history flows entering the basin experienced minimal interaction with the sea floor and where free to expand and decelerate. The deposits resulting from these flows are lobate bodies that occur immediately down-stream of the inlet channel at a break in slope. These early lobes show only minor internal channelization. Through time, and as deposition continued, flows began to impinge on the aggrading surface of the fan. As a consequence, the flows began to erode the surface of the fan initiating the formation of distributary channels. Additionally, flows were progressively partitioned, or split into multiple channels over time. The advancing depositional front forced the southwesterly translation of the break in slope and flows exiting the channels were forced to pass further into the basin through branching pathways. The channels appear to have filled rapidly after their formation. Diversions of flows due to channel plugging, and the influence of antecedent topography were the primary causes of avulsion. Fan progradation results in the successive off-lap of lobate packages and extension of a distributary network of channels into the basin. At the mouths of the distributaries we find channel terminus lobes that exhibit a stratigraphic evolution similar to that observed for the entire fan, but at a much smaller scale (Figure 6). These lobes are of variable size and thickness and consist of small-scale, fan-like bodies (fans within fans). The lobes also contain distributary networks of small, secondary channels. At the mouths of these smaller distributaries are mouth bars on the order of 10s of meters wide around which the channels bifurcate. These small distributary channels are leveed and channel fills consist of mid-channel bars and point bars. Local crevasse splay deposits adjacent to the trunk channels are also observed. As far as we are aware, this is the first time such an assemblage of deposits has been observed at the termination of a submarine fan. The similarities between these deepwater fan lobes and those of many modern river deltas are remarkable. Preliminary fluid dynamics modeling indicates delivery of sediment to the fan was likely the result of jet-like flow similar to that occurring at the mouths of rivers in flood (Hoyal et al., 2003). These results suggest that fundamental depositional processes and shapes of sedimentary bodies are more independent of depositional environment than previously recognized.
Beaubouef, R.T., V. Abreu, and N.L. Adair, 2003, Ultra-high
Beaubouef, R.T., and S.J. Friedmann, 2000, High Beaubouef, R.T. and others, 2000, Deep-water sandstones of the Brushy Canyon Formation, West Texas, AAPG Continuing Education Course Notes, no. 40, American Association of Petroleum Geologists, Tulsa, Oklahoma. Hoyal, D.C.J.D., J.C. Van Wagoner, N.L. Adair, M. Deffenbaugh, D. Li, T. Sun, C. Huh and D.E. Giffin, 2003, Sedimentation from jets: A depositional model for clastic deposits of all scales and environments:Search and Discovery Article #80081. Van Wagoner, J.C., D.C.J.D. Hoyal, N.L. Adair, T. Sun, R.T. Beaubouef, M. Deffenbaugh, P.A. Dunn, C. Huh, and D. Li, 2003, Energy dissipation and the fundamental shapes of siliciclastic sedimentary bodies: Search and Discovery Article #40080. |