Click to view article in PDF format.
Geological Controls and Variability in Pore Pressure in the Deep-Water Gulf of Mexico*
By
Michael A. Smith1
Search and Discovery Article # 10029 (2002)
*Adapted for online presentation from article of the same title by the same author published in AAPG Memoir 76 (August, 2002), Pressure Regimes in Sedimentary Basins and Their Prediction, A. R. Huffman and G. L. Bowers, eds., p. 107-113. This publication may be purchased from AAPG Bookstore (http://bookstore.aapg.org).
1Minerals Management Service, New Orleans, Louisiana ([email protected]).
Abstract
In most areas of the world, pressure-related drilling problems are the leading cause for abandoning a deep-water well or else requiring expensive remedial changes in the drilling and casing programs to reach its targeted reservoir depths. This chapter discusses geological controls and trends in the onset of geopressure in the deep-water Gulf of Mexico, shallow water flow from overpressured sands in the top-hole section, and other pressure-related problems unique to deep water. Pore-pressure prediction has become a subject of intense current interest with several joint industry projects and predictive models now available for government and company participation.
uOverpressured sands in ultradeep water
uOverpressured sands in ultradeep water
uOverpressured sands in ultradeep water
uOverpressured sands in ultradeep water
uOverpressured sands in ultradeep water
uOverpressured sands in ultradeep water
uOverpressured sands in ultradeep water
uOverpressured sands in ultradeep water
|
Figure Captions
Click here for sequence of Figure 2 and Figure 3.
Click here for sequence of Figure 2 and Figure 3.
Introduction
As
In this article, we look at the occurrence of geopressure in about 100
wells in deep water from Viosca Knoll to Alaminos Canyon, most of them
drilled in more than 2000 ft (610 m) of water during the last five
years. We also analyze shallow water-flow encounters and trends in these
areas. As exploratory drilling begins in previously untested geological
trends in ultradeep water, new technology and equipment will be needed
to control unique pressure-related drilling problems encountered in the
Pore-Pressure Gradients
Minerals Management Service (MMS) geological reviews of
We analyzed predicted and actual pore pressures, sedimentation rates, and formation temperatures in the deep-water Gulf of Mexico and prepared trend maps of the occurrence of geopressure for this province. The top of geopressure was defined as the depth at which pore-pressure equivalent mud weights, referenced to kelly bushing elevation, exceeded 12.5 ppg. The wells in this study are located in four deep-water sections that include, from east to west, Viosca Knoll/ Mississippi Canyon/Atwater Valley, Green Canyon, Garden Banks, and East Breaks/Alaminos Canyon. The upper slope (less than 1000 m of water) in Mississippi Canyon has a thicker Pliocene section with a shallower top of geopressure, an average of about 6950 ft (2118 m) bml, than the deeper water parts of this area. In deeper water, the average top of geopressure occurs in the Miocene at about 10,700 ft (3261 m) bml. In the younger Pliocene-Pleistocene section to the west in Green Canyon, Garden Banks, and East Breaks, the average top of geopressure occurs at about 8700 ft (2652 m) bml. In the deeper water sections in Green Canyon, Garden Banks, and Alaminos Canyon to the south and southeast, however, the top of geopressure occurs in the Miocene at an average depth of about 11,200 ft (3414 m) bml. Throughout the deep-water Gulf of Mexico, as shown in Figure 2, it appears that older and more compacted strata have a deeper top of geopressure than occurs in younger strata.
Except for the northeastern corner of Mississippi Canyon, the thermal gradient in the eastern study area is lower than that of deep-water areas to the west, generally about 1.05oF/100 ft (0.58oC/30.5 m). The thermal gradient falls from an average of 1.25oF/100 ft (0.69oC/30.5 m) in East Breaks to about 1.0oF/100 ft (0.555oC/30.5 m) in Garden Banks, and in Green Canyon the temperature gradient appears to decrease from 1.3 to 0.8oF/100 ft (from 0.72 to 0.44oC/30.5 m) to the southeast with greater water depths. These observations suggest that lower thermal gradients may correspond to a deeper top of geopressure.
Salt domes and ridges that form the boundaries of salt-withdrawal minibasins cause increased pore pressure in the surrounding sediment. This fact results in anomalously high pore pressures in wells drilled on the flanks of a salt dome relative to wells drilled through equivalent strata toward the center of the basin. Pore-pressure ramps or steep increases also occur adjacent to salt masses, and some deep-water exploratory wells have had to be abandoned during attempts to drill through overpressured fractured shale associated with a salt diapir before the reservoir interval was reached. Below tabular salt sheets, formations can be overpressured because of an effective seal, and in some subsalt wells a pressure kick has been encountered in the rubble zone below salt. In general, however, the top of subsalt geopressure occurs at greater depths and deeper in the stratigraphic section than in wells without salt.
Shallow Water-Flow Sands
Water flow from an overpressured shallow aquifer occurring above the first pressure-containing casing string can significantly impact drilling and cementing practices in addition to the setting depth and number of shallow casing points. This shallow subsurface geohazard may even cause an operator to change a surface location or lose a well. Shallow water-flow sands were deposited as continental slope/fan sequences during upper Pleistocene progradation, the building out of prodelta sandy zones. Since 1984, shallow water-flow occurrences have been reported in about 70 Gulf of Mexico lease blocks covering 55 oil and gas fields or prospects. With a few exceptions, water-flow incidents occur at water depths exceeding 1700 ft (518 m) with a mean value at about 3000 ft (914 m) of water. Water-flow problem sands also typically occur from 950 to 2000 ft (290-610 m) bml but have been reported from 450 to 3500 ft (137-1067 m) below the sea floor. Individual channel-sand units display slumping zones or debris flows with a chaotic seismic character and, in some cases, tilted and rotated slump blocks. In the Mississippi Canyon and southern Viosca Knoll areas, some of the shallowest channel sands can be identified as part of a particular distributary system such as the old Timbalier Channel, Southwest Pass Canyon, or Einstein levee/channel system. High-sedimentation rates and an impermeable mud or clay seal from a condensed section are the main factors contributing to overpressures in shallow water-flow sands (Alberty et al., 1997). These sands occur in several depositional subbasins that are generally bounded by salt ridges or walls. No significant water-flow occurrence, however, is found over tabular salt sills that are 1000 to 10,000 ft (305-3048 m) below the sea floor in some areas. This fact may suggest that communication with the deeper stratigraphic section contributes to abnormal pressures in shallow sands or that the salt forms a positive sea floor topographic feature, preventing sediment loading that might contribute to the generation of overpressures. The integration of high-resolution multichannel and reprocessed conventional two-dimensional (2-D) and three-dimensional (3-D) seismic data for the top-hole section, further refined by seismic facies analysis, can identify sand bodies with moderate or high shallow water-flow potential. In assessing shallow water-flow risk, information from surrounding wells and shallow borehole tests also provides important data for drilling program design. The MMS Notice to Lessees and Operators (NTL) on shallow hazards requirements for the Gulf of Mexico OCS, NTL 98-20, is currently undergoing extensive revisions (Stauffer et al., 1999). The updated NTL will accommodate the shifting focus of drilling into deeper water and the improved technology and data now available to mitigate deep-water geohazards such as shallow water flow.
Mitigating approaches that have been used in the drilling of shallow water-flow areas include measurement while drilling (MWD) logging plus an annular pressure measurement while drilling (PWD) tool, monitoring and confirming shallow water-flow occurrences with remotely operated vehicles (ROV), and drilling the shallow section as a pilot hole. Additional casing strings and quick-setting foam cements, borehole tests to 1500 to 5000 ft (457-1524 m) bml before development drilling, and other geophysical and engineering techniques that are currently under development have also been employed. The loss of integrity plus buckling or collapse of shallow casing strings in development wells has caused serious economic loss in several cases. Establishing a database of known shallow water-flow occurrences and the most effective methods for controlling them will greatly advance the partnership between the MMS and offshore operators in containing this critical deep-water hazard (Smith, 1999).
Overpressured Sands in Ultradeep Water
In low-margin deep-water drilling areas with abruptly increasing pore pressures and weak fracture gradients, extra casing strings are needed to maintain control in the shallower part of the well. A conventional single-gradient mud system and marine riser maintain bottom-hole pressure with a single mud density from the rig to the bottom of the well, which may require extra casing strings to prevent weaker formations from fracturing. In addition, loop currents or other strong deep-water currents might limit drilling at times because of high riser loads. With a dual-gradient system, however, mud is diverted to separate riser return lines with the effect of replacing the mud from the drilling riser with seawater and referencing pressure gradients relative to the sea floor (Smith and Gault, 2002). The larger hole size maintained at total depth with this technology also allows more completion and production options for deep-water reservoirs.
The northern Gulf of Mexico Basin can be divided into various arcuate tectonic provinces that parallel the shelf/slope break (Diegel et al., 1995; Karlo and Shoup, 1999). Salt-withdrawal minibasins on the continental slope, such as those in the Green Canyon and Garden Banks areas, are bounded by salt walls and filled with the ponded turbidite sands that provide reservoirs for most of the earlier deep-water Gulf of Mexico discoveries. A tabular salt canopy tectonic province occurs in a basinward direction in Walker Ridge and Keathley Canyon, and the Sigsbee Escarpment defines its extent. The middle to lower continental slope contains fold/thrust belts with large prospective geological structures that are the focus of current deep-water drilling and include several recent discoveries (Peel, 1999; Rowan et al., 2000). Figure 3 shows the distribution of hydrocarbon plays in the deep-water Gulf of Mexico, including untested plays in ultradeep water.
In the centroid concept, pore pressure in a reservoir sand at the crest
of a high-relief overpressured structure can exceed pore pressure in the
bounding shale. Deep-water areas with extensive shallow faulting are
particularly vulnerable to low-margin drilling conditions that require
extra casing strings. The top of a large, high-relief fold or anticlinal
structure at various depths in an exploratory well may contain fluid
pressures that approach the fracture gradient in adjacent shale (Traugott,
1997). The mud log from a 1996 ultradeep-water well (Figure 4) provides
an example of substantial pore-pressure increases that required closely
spaced additional casing strings in the shallow section. This
exploratory well was abandoned less than 3000 ft (914 m) bml because of
the narrow margin between pore-pressure and fracture gradient in
addition to its small hole size well above the prospective target
interval. The use of a dual-gradient/riserless drilling approach and
other
Conclusions
Many of the serious and costly drilling problems in deep water are related to the pore-pressure/fracture gradient relationship. Other pressure-related hazards, such as shallow water flow, require better predrill identification and quantification of overpressured problem sands. In many Gulf of Mexico frontier deep-water areas, a lack of offset wells mandates better pressure models that incorporate all available geological data. Operations geologists and geophysicists in the MMS are working with deep-water operators to establish databases and methodologies that will improve industry’s success in dealing with deep-water geohazards well into the new millennium.
References Cited
Alberty, M.W., M.E. Hafle, J.C. Minge, and T.M. Byrd, 1997, Mechanisms of shallow waterflows and drilling practices for intervention: Offshore Technology Conference Proceedings Paper OTC 8301, p. 241-247.
Baud, R.D., R.H. Peterson, C. Doyle, and G.E. Richardson,
2000, Diegel, F.A., J.F. Karlo, D.C. Schuster, R.C. Shoup, and P.R. Tauvers, 1995, Cenozoic structural evolution and tectono-stratigraphic framework of the northern Gulf Coast continental margin: AAPG Memoir 65, p. 109-151.
Dutta, N.C., ed., 1987, Geopressure: Society of
Fertl, H.W., 1976, Abnormal formation pressures: Amsterdam, Elsevier, 382 p.
Karlo, J.F., and R.C. Shoup, 1999, Large patterns become
predictive tools to define trends, reduce Law, B.E., G.F. Ulmishek, and V.I. Slavin, eds., 1998, Abnormal pressures in hydrocarbon environments: AAPG Memoir 70, 264 p.
Peel, F., 1999, Structural styles of traps in
Rowan, M.G., B.D. Trudgill, and J.C. Fiduk, 2000,
Smith, M.A., 1999, MMS regulatory approach to shallow water flow mitigation: Proceedings of the 1999 International Forum on Shallow Water Flows, paper 15, unpaginated. Smith, K.L., and A.D. Gault, 2002, Subsea mudlift drilling: a new technology for ultradeep-water environments, in A.R. Huffman and G.L. Bowers, eds., Pressure regimes in sedimentary basins and their prediction: AAPG Memoir 76, p. 171-175. Stauffer, K.E., A. Ahmed, R.C. Kuzela, and M.A. Smith, 1999, Revised MMS regulations on shallow geohazards in the Gulf of Mexico: Offshore Technology Conference Proceedings Paper OTC 10728, v. 1, p. 79-81. Traugott, M., 1997, Pore/fracture pressure determinations in deep water: World Oil, v. 218, no. 8, p. 68-70.
Acknowledgments
This project was initiated as a result of excellent presentations at the 1998 American Association of Drilling Engineers Industry Forum on Pressure Regimes in Sedimentary Basins and their Prediction. Preliminary results were presented at the 1998 MMS Information Transfer Meeting and the 1999 AAPG International Conference in Birmingham, England. I thank two anonymous reviewers and, particularly, James C. Niemann for their insightful comments, which greatly improved this chapter. Some of the ideas presented here were clarified by discussions with Jim Bridges, Matt Czerniak, Nader Dutta, Pete Harrison, Alan Huffman, Bob Peterson, Paul Post, and Selim Shaker. Finally, I am grateful to the MMS Gulf of Mexico Region, especially to Darcel Waguespack, Fred Times, and Wayne Plaisance, for help and support in the preparation of this chapter. |