Abstract: Seismic Imaging a Carbonate Reservoir: The Paris Basin Dogger
Denis Mougenot
Within the Dogger project, seven partners joined forces (CGG, DHYCA, EAP, ESSO-REP, IFP, TOTAL, TRITON France) to develop an appropriate seismic acquisition, processing and interpretation methodology in order to improve the description of the main oil reservoir (30 m) lying at the top of the Dogger carbonates in the Paris basin, at a depth of 1900 m.
High-resolution 2D Vibroseismic is used to record high frequencies (up to 100 Hz) at the level of the target, and provides sufficiently adequate vertical resolution for the reflections at the top and at the base of the reservoir not to interfere.
The upper frequency content of the 3D seismic (70 Hz) is more difficult to enhance. Yet the essential contribution made by the 3D is to evidence, via horizon attributes, sub-meridian lineaments corresponding to faults with throw of several meters which is too weak to be detected on vertical sections. The distribution of these faults, via which water tends to invade the reservoir, and the organization of the amplitudes at the top reservoir reflector, which seems to suggest lateral variations in porosity, are a valuable guide for setting up wells.
Three-component seismic (2D-3c) and S-wave emissions did not produce any reflections beyond 30 Hz at the level of the target which is a poor reflector (PS & SS). Only borehole
seismic (VSP, offset VSP), where high frequencies are much less attenuated than with surface seismic, provides detailed imaging of the reservoir in converted mode (up to 110 Hz in PP and in PS).
The combination of a continuous spatial sampling, such as that obtained in 3D, and of a Vibroseis emission adapted to frequency attenuation, such as that used in 2D, can supply useful information about the thin and discontinuous Dogger reservoir which cannot be provided by mere correlation of the borehole
data.
AAPG Search and Discovery Article #90956©1995 AAPG International Convention and Exposition Meeting, Nice, France